Tutorials

Lista di Imballaggio

La lista di imballaggio e la seguente.

①Connect ②Supporto Telefono ③Cavo Dispositivo1 ④Cavo Dispositivo2 ⑤Cavo Mobile ⑥Cavo Alimentazione

Connessione Hardware

Connect the 3DMakerpro Connect to the scanner with the Cavo Dispositivo; connect it to the phone with the mobile cable; connect it to the power bank with the Cavo Alimentazione. Notice the power bank needs to be purchased by itself, and the requirements are: 12V PD 22.5W Type-C interface.

＊ Cavo Dispositivo1

Please make sure the red dot on the plug is lined up with the groove on the device port in case of causing damage to the device. Be sure to plug and unplug the cable in the power-off state.