PACKING LIST

1.Backpack 2.Fixed Base 3.Handle 4. Knurled Thin Thumb Screws 5. D-Ring Mounting Screw 6. Shoulder Screw 7.Allen Wrench

*Product images are for illustrative purposes only. Actual product may vary.

Assembly

1. Fix the handle to the backpack

Align the backpack screws with the screw holes at the bottom of the handle, then tighen them.

2. Fix the fixed base to the backpack

a. Insert the fixed base into the hole at the top of the backpack.

b. Align the screw holes on both sides of the backpack with the screw holes on the fixed base. Use the allen wrench to pass the screws through the two screw holes and tighten them.

3. Fix the device to the fixed seat

Tighten the D-Ring Mounting Screw and Knurled Thin Thumb Screws after aligning them with the screw holes at the bottom of the Fixed Base and the device.

4. Lift the kit up and secure it

a. After lifting the chest mounting frame, put the backpack on your back.

b. Fasten the waist buckle and the chest buckle.

c. Lower the chest mounting frame.

d. Fix the waist handle to the chest mounting frame. (Press the two sides buttons on the handle to disconnect it from the chest mounting frame.)