PACKING LIST

1.Bicycle Mount 2.Double-Sided Tooth Anti-Slip Washer 3.Alluminum Spacer 4.D-Ring Mounting Screw 5.Allen Wrench 6.Front Derailleur Clamp2 7.Latch 8.Semicircle Rubber Grommet (2small 2big) 9.Ball Lock Pin 10.M5 x 15 Three-Combination Head Cap Screw4 11.M5 x 50 Hex Socket Head Shoulder Screw*2

*Product images are for illustrative purposes only. Actual product may vary.

Assembly

1.Assemble the Bicycle Mount and Front Derailleur Clamps

Use the hexagonal wrench to fix the bicycle mount and the front derailleur clamps with the M5 x 15 three-combination head cap screw. Please adjust the front and rear position of the bicycle mount hole according to the model of the bicycle.

2.Attach the Eagle Scanner to the Bicycle Mount

a. Place the double-sided tooth anti-slip washer at the bottom of the D-Ring mounting screw shank.

b. Secure the scanner to the bicycle mount with the screw above.

3.Fix the Front Derailleur Clamps to the Bicycle Handlebars

a. Choose the appropriate size of semicircle rubber grommet and clip it inside the front derailleur clamp.

b. Use the Allen wrench to fix the bicycle handlebar and the front derailleur clamp with the M5 x 15 three-combination screws.

4.Fix the Latch to the Bicycle Handlebars

a. Remove the screws that come with the bicycle.

b. Fix the latch to the bicycle mount with the ball lock pin.

c. Put the alluminum spacer on the screw once the M5X50 screw passes through the hole of the latch. Then adjust the screw position, use the Allen wrench to insert and tighten the screw into the hole of the bicycle.